How to install additional features on a ride - on floor industrial scrubber?

Jul 03, 2025

Leave a message

Emily Zhang
Emily Zhang
Quality Assurance Engineer at山东天骏清洁设备有限公司. Committed to ensuring every machine meets rigorous international standards, from functionality to aesthetics, to deliver reliable performance to our global customers.

As a supplier of Ride On Floor Industrial Scrubbers, I understand the importance of maximizing the functionality and efficiency of these machines. Installing additional features can significantly enhance the performance of a ride - on floor industrial scrubber, making it more versatile and better suited to a wide range of cleaning tasks. In this blog post, I'll guide you through the process of installing additional features on a ride - on floor industrial scrubber.

Understanding Your Scrubber

Before you start installing any additional features, it's crucial to have a thorough understanding of your ride - on floor industrial scrubber. Different models come with varying specifications, capabilities, and design features. Refer to the user manual that came with your scrubber. This document will provide you with detailed information about the machine's electrical system, mechanical components, and any existing interfaces that can be used for adding new features.

Identifying the Right Additional Features

The first step in the installation process is to determine which additional features are most suitable for your specific cleaning needs. Here are some common additional features that you might consider:

G3_17349238708104_

  • Advanced Filtration Systems: These can improve the air quality in the cleaning area by capturing more dust and debris. They are especially useful in industrial settings where there may be a high concentration of fine particles.
  • Chemical Injection Systems: With a chemical injection system, you can precisely control the amount of cleaning solution used during the scrubbing process. This not only ensures effective cleaning but also helps in reducing chemical waste.
  • GPS Tracking: GPS tracking allows you to monitor the movement and usage of your scrubber. This can be beneficial for fleet management, as it helps in optimizing routes and scheduling maintenance.

Pre - installation Preparation

Once you've decided on the additional features you want to install, it's time to prepare for the installation process.

  • Gather the Necessary Tools: Depending on the feature you're installing, you may need tools such as wrenches, screwdrivers, wire cutters, and electrical connectors. Make sure you have all the required tools on hand before you start.
  • Safety First: Always wear appropriate safety gear, such as gloves and safety glasses. If the installation involves working with electrical components, ensure that the scrubber is powered off and disconnected from the power source.
  • Read the Installation Instructions: Each additional feature comes with its own set of installation instructions. Carefully read and understand these instructions before you begin the installation.

Step - by - Step Installation Process

Installing an Advanced Filtration System

  1. Locate the Existing Filtration Area: Find the area on the scrubber where the current filtration system is installed. This is usually near the air intake or exhaust of the machine.
  2. Remove the Old Filter: Use the appropriate tools to remove the old filter from its housing. Be careful not to damage any surrounding components.
  3. Install the New Filter: Place the new advanced filtration system in the housing, following the manufacturer's instructions. Make sure it is properly seated and secured.
  4. Check for Leaks: After installation, turn on the scrubber and check for any air leaks around the new filter. If you detect a leak, re - check the installation and make any necessary adjustments.

Installing a Chemical Injection System

  1. Identify the Chemical Storage and Delivery Points: Locate the areas on the scrubber where the cleaning solution is stored and delivered. This may involve opening compartments or panels to access these areas.
  2. Connect the Chemical Injection System: Use the provided tubing and connectors to attach the chemical injection system to the existing cleaning solution delivery system. Ensure that all connections are tight and secure.
  3. Program the System: Most chemical injection systems allow you to set the desired amount of chemical to be injected. Follow the programming instructions to configure the system according to your cleaning requirements.
  4. Test the System: Fill the chemical storage tank with the appropriate cleaning solution and run the scrubber. Check that the chemical is being injected at the correct rate.

Installing GPS Tracking

  1. Choose the Mounting Location: Select a suitable location on the scrubber to mount the GPS tracking device. This should be a place where the device can receive a clear GPS signal and is protected from damage.
  2. Mount the Device: Use the mounting hardware provided with the GPS tracking device to attach it to the scrubber. Make sure it is firmly attached and does not interfere with the operation of other components.
  3. Connect the Device to the Power Source: Locate a suitable power source on the scrubber, such as a battery or electrical outlet. Connect the GPS tracking device to the power source using the appropriate wiring.
  4. Activate the GPS Tracking: Follow the instructions provided by the GPS tracking device manufacturer to activate the device and register it with the tracking service.

Post - installation Testing

After installing the additional features, it's essential to thoroughly test the scrubber to ensure that everything is working correctly.

  • Functionality Test: Run the scrubber through a normal cleaning cycle and check that all the newly installed features are functioning as expected. For example, if you installed a chemical injection system, make sure the correct amount of chemical is being dispensed.
  • Performance Check: Monitor the performance of the scrubber in terms of cleaning efficiency, power consumption, and any other relevant factors. Compare the performance before and after the installation to assess the impact of the additional features.
  • Safety Check: Re - check all the connections and components to ensure that there are no safety hazards. Make sure that all moving parts are properly lubricated and that there are no loose wires or fittings.

Other Related Floor Scrubbers

If you're interested in different types of floor scrubbers, we also offer a variety of options. You can explore our Self Propelled Hand Push Floor Scrubber, Walk Behind Dual Brush Floor Scrubber, and Multi Functional Hand Push Floor Scrubber. These scrubbers are designed to meet different cleaning needs and can be customized with additional features as well.

Conclusion

Installing additional features on a ride - on floor industrial scrubber can greatly enhance its performance and versatility. By following the steps outlined in this blog post, you can ensure a successful installation process. If you have any questions or need further assistance with installing additional features or choosing the right scrubber for your needs, don't hesitate to contact us. We're here to help you make the most of your cleaning equipment. Whether you're looking to upgrade your existing scrubber or purchase a new one, we can provide you with the expertise and support you need. Reach out to us to start a discussion about your specific requirements and how we can help you achieve your cleaning goals.

References

  • Manufacturer's manuals of ride - on floor industrial scrubbers and additional features.
  • Industry best practices for floor scrubber maintenance and customization.
Send Inquiry