CleanHorse ARES900 Floor Scrubber: the "All-Powerful Warrior" for Cleaning Complex Scenes
The ARES900 floor scrubber under the CleanHorse brand is a medium-to-large ride-on floor scrubber launched by CleanHorse. With multiple innovative technologies and excellent design, it has become an "all-powerful warrior" in complex cleaning scenarios, providing users with efficient, reliable, and economical cleaning solutions.

1. Integrated Cast Aluminum Chassis Technology, Suitable for Various Complex Scenarios
The integrated cast aluminum chassis technology is the first technology applied by the CleanHorse brand in floor scrubbers, and it is also the technology with which the main ARES series products are assembled.
The integrated cast aluminum chassis technology used in the ARES900 floor scrubber is the key to its ability to easily handle various complex cleaning scenarios. From material characteristics to structural design, it has laid a solid foundation for the machine's environmental adaptability and performance.
Many users are not familiar with the actual value of this technology, so we will explain it in detail through this article.
(1) Material Advantages: Perfect Combination of Strength, Light Weight, and Corrosion Resistance
The cast aluminum material itself has many excellent characteristics.
Firstly, it has high strength and can withstand the weight of the floor scrubber itself as well as the various pressures generated during the cleaning process. Even when driving on uneven surfaces, it can maintain good rigidity and is not easily deformed.
This is crucial for working in complex ground conditions such as factory workshops and warehouses, as it can effectively prevent damage to the chassis caused by excessive pressure and extend the service life of the chassis and even the machine.

Secondly, it is lightweight. Compared to traditional iron chassis, a cast aluminum chassis is lighter in weight, which helps improve the maneuverability and flexibility of the floor scrubber, allowing it to move easily in narrow passages and densely populated areas without affecting cleaning performance.
Meanwhile, lightweight models can also reduce energy consumption to a certain extent, and coupled with ECO energy-saving mode, further extend the battery life of the floor scrubber.
Another advantage is excellent corrosion resistance. During cleaning work, floor scrubbers often come into contact with corrosive or hazardous substances such as chemical solutions and cleaning agents, especially in factory workshops where the floor may contain more corrosive substances such as oil stains and iron filings.
The integrated cast aluminum chassis can effectively resist the invasion of these corrosive factors, prevent chassis rust and damage, and ensure the structural stability and driving safety of the machine.
(2) Structural Design: Integrated Molding, Upgraded Stability and Reliability
The integrated cast aluminum chassis adopts an integral molding process, which is more stable in structure compared to a spliced chassis, and avoids problems such as water leakage and dust ingress caused by splicing gaps.
This not only better protects the internal components of the chassis, such as the drive system, from external impurities and damage, but also improves the sealing performance of the chassis, further enhancing its corrosion resistance and overall stability.
In practical applications, this integrated structure allows the ARES900 floor scrubber to maintain good performance when facing various complex terrains.
For example, in a large warehouse, the floor may have slopes or thresholds. With the excellent strength and rigidity of its integrated cast aluminum chassis, combined with a 20° climbing ability, the ARES900 can smoothly climb inclines and pass through obstacles, flexibly moving through various areas of the warehouse to complete cleaning tasks.
In places with high hygiene requirements such as hospitals, the integrated cast aluminum chassis is easy to clean and disinfect, effectively preventing bacterial growth and meeting strict hygiene standards.

2. Fully Automatic Disc Brushing and Suction Lifting System to Reduce Potential Faults
The ARES900 floor scrubber is equipped with a fully automatic brushing and suction lifting system, which is one of its core advantages.
Traditional floor scrubbers rely heavily on manual operation for the lifting of the brush and suction scraper, which is not only cumbersome but also prone to component damage due to improper or forceful operation, increasing the incidence of malfunctions.
The fully automatic system of the ARES900 can achieve automatic lifting and lowering of the brush disc and suction scraper through an intelligent control system.
At the beginning of the cleaning operation, the system can accurately control the brush disc to descend to the appropriate height and make full contact with the floor to ensure cleaning effectiveness.
The water-absorbing scraper can also be adjusted to the optimal angle simultaneously, efficiently recovering sewage.
When cleaning is completed or when crossing obstacles, the brush disc and suction scraper can automatically rise to avoid collision with obstacles.
This fully automatic operation reduces errors caused by manual intervention and minimizes damage from improper human operation to the brush disc, suction scraper, and related transmission components, thereby significantly reducing the machine's failure rate.
3. Wear-Resistant Absorbent Rubber Strip and Brush Disc, Saving Consumable Costs
In cleaning work, absorbent strips and brush discs are vulnerable consumables, and frequent replacement increases operating costs.
The ARES900 floor scrubber adopts wear-resistant absorbent rubber strips and brush discs, effectively solving this problem.
The water-absorbing rubber strip is made of high-quality, wear-resistant, and oil-resistant materials, which can withstand long-term friction without easily wearing out when in contact with the floor to recover sewage.
Even on rough cement floors or factory floors with heavy oil stains, wear-resistant rubber strips maintain good performance and greatly extend service life.
The brush disc of the ARES900 also has excellent wear resistance. Made with special technology and nylon steel wire, it effectively resists the friction and erosion of stains on the floor when cleaning at high-speed rotation.
Whether cleaning stubborn oil stains or handling ground particles, the wear-resistant brush discs maintain stable cleaning effects and are not easily damaged.
4. Excellent Performance, Empowering Efficient Cleaning
In addition to the core technological highlights mentioned above, the ARES900 floor scrubber also has a series of outstanding performance features, further improving cleaning efficiency.
Firstly, it has a cleaning width of 860 mm and can clean 6,000 square meters of floor per hour. For large cleaning areas, it can quickly complete cleaning work.
The 160L clean water tank and 180L sewage tank provide capacity to meet the water demand for long-term cleaning, reducing the frequency of adding water and dumping sewage.
The 24V 200Ah battery, combined with ECO energy-saving mode, can support continuous operation of the floor scrubber for 3–4 hours, providing sufficient battery life for large-scale cleaning.
In addition, the noise level of the ARES900 is only 60 dB, which does not cause excessive disturbance to the surrounding environment and personnel when used in noise-sensitive places such as hospitals and office buildings.
The intelligent operating system makes the machine more convenient to operate, allowing staff to quickly get started and further improving cleaning efficiency.

Conclusion
In summary, the CleanHorse ARES900 floor scrubber, with integrated cast aluminum chassis technology as its core, combined with a fully automatic brush and suction lifting system, wear-resistant suction rubber strips and brush discs, and excellent overall performance, has become a powerful tool in complex cleaning scenarios.
It not only improves the efficiency and quality of cleaning work but also provides users with an economical and reliable cleaning experience, making it a high-quality choice for customers who pursue efficient cleaning and long-term value.
As a leading brand in the global ground cleaning equipment industry, CleanHorse is committed to providing customers with the most cost-effective cleaning equipment and the highest-quality service solutions. We will steadfastly fulfill our mission: making cleaning easier and making the world a better place.
