Principle Of Floor Scrubber

Dec 01, 2024

Leave a message

‌The working principle of floor scrubber mainly includes two processes: cleaning and water absorption. ‌‌

‌Cleaning principle‌: After the floor scrubber is powered on, the equipment will automatically mix clean water and detergent in proportion. The mixed cleaning liquid will automatically flow to the brush disc at the bottom of the floor scrubber, relying on the friction of the disc brush and roller brush rotating on the ground and the detergent to remove the dirt on the ground, thereby achieving the cleaning effect.

‌Water absorption principle‌: The floor scrubber is equipped with a vacuum motor, which can form a high-speed airflow to keep the sewage tank in a vacuum state. The soft rubber strip in front of the curved squeegee on the rear side of the floor scrubber can fit the ground tightly, and the collected sewage is absorbed by the high-speed airflow in the vacuum environment, recovered into the sewage tank through the sewage suction pipe, and finally extracted and emptied by the vacuum motor. In this way, there will be no residual sewage on the cleaned ground, keeping it bright and clean.

Send Inquiry